Flush Mount LED Tail Lights for Jeep Gladiator JT

Transform your Gladiator’s rear end with premium flush-mount LED tail lights engineered specifically for the Jeep Gladiator JT. Designed to sit tight and low-profile against the truck bed, these lights deliver a clean OEM+ appearance while improving visibility and function.

The nearly flush wrap-around design keeps rear lighting visible from virtually any angle and helps reduce trail damage risk compared to factory tail lights. Signature perimeter lighting gives the truck a modern, high-end look, while the enhanced reverse output uses 10 high-powered LEDs.

A direct plug-and-play connection makes installation straightforward, and the housing supports the factory blind spot / cross-traffic sensor by allowing the OEM sensor to swap directly into the ORACLE housing.

• Flush-Mount Design: Sits nearly flush with the body for a clean, factory-plus appearance that eliminates the bulky OEM look.
• Full LED Technology: Brighter output and faster response than stock bulbs for improved safety and visibility.
• Direct Plug-and-Play Fit: Designed specifically for the Jeep Gladiator JT with OEM-style connectors and no cutting or splicing required.
• DOT / SAE Compliant: Street-legal performance for brake, turn signal, running light, and reverse functions.
• Durable Construction: Weather-sealed housing stands up to mud, dust, water, and temperature extremes for dependable off-road use.
• Engineered for Gladiator JT: Unlike generic options, these are built specifically for the JT’s tailgate design, helping protect the lights from trail damage while delivering a premium custom appearance.

• Flush-mount design for a sleek, low-profile OEM+ appearance
• Wrap-around tail light visibility for improved rear-angle visibility
• Signature perimeter lighting for a modern premium look
• 10 high-powered reverse LEDs for enhanced rear illumination
• Compatible with factory blind spot / cross-traffic sensor transfer
• Direct plug-and-play installation using OEM connectors
• Available with standard or tinted lens options
• DOT / SAE compliant
• 2-Year Warranty

• (1) Pair Flush Mount LED Tail Lights for Jeep Gladiator JT
• (1) Online Instruction Guide

If your package did not include the resistors, please contact Customer Support here.

North American models: These lights are designed for North American Jeep Gladiator JT models. For European or Export Jeeps, we recommend upgrading the reverse lights with the Dual Function Amber / White Reverse LED Modules (Part #5915-JT-023) to improve road compliance.

Additional note: Some halogen-equipped Gladiators may also require a programmer to prevent park lights from shutting down.

Install Guide Resistor Diagram

Installation: Simple bolt-in installation using factory mounting points. Most customers complete installation in under 30 minutes with basic hand tools.

Fits: 2020, 2021, 2022, 2023, 2024, 2025, and 2026 Jeep Gladiator JT

Compatible Trims: Sport, Sport S, Overland, Rubicon, Mojave, High Altitude, Willys, Texas Trail, and 4xe

Note: Designed for North American market vehicles. European / Export models may require additional modules for full compliance.

A Tail Light Redesigned for the Gladiator's True Potential

The factory tail lights on the Jeep Gladiator JT were designed to meet a spec. These were designed to exceed it. The ORACLE Lighting Flush Mount LED Tail Lights wrap tightly around the truck bed, protruding significantly less than the factory lights — a low-profile design that reduces the risk of trail damage while keeping your rig looking sharp.

Available in Standard Red and a Blacked-Out Tinted version, these lights are the clean, capable upgrade your Gladiator deserves.

Form That Follows Function

Wrap-Around Visibility From Every Angle

Because of the nearly flush wrap-around design, the lighting can be visible from any rear angle — a meaningful safety and style advantage over the factory setup. Whether you're pulling out of a campsite, backing up a trailer, or navigating tight trails, other drivers will always have a clear sightline to your lights.

Signature Perimeter Lighting

The ORACLE JT Flush Tail Lights feature signature perimeter lighting that traces the edge of the housing for a distinctive, premium appearance. It's the kind of detail you'd expect from a much more expensive aftermarket light — delivered at an accessible price point.

10 High-Powered LED Reverse Lights

The reverse light features 10 high-powered LEDs for optimal rear illumination. This is a substantial upgrade over the factory reverse light, giving you a significantly wider and brighter view when backing up — whether in a dark campground, a muddy trail turnaround, or an unlit parking lot.

Plug-and-Play Installation — No Cutting, No Splicing

True Plug-and-Play Fitment

The ORACLE JT Flush Tail Lights are engineered for a direct OEM replacement experience. The plug-and-play design features an enhanced reverse function and caters to the Jeep's optional cross-traffic sensor. The factory cross-traffic sensor module transfers directly from your stock assembly — no modification, no custom wiring, no loss of functionality.

Compatible with Base and LED Factory Packages

These flush-mount tail lights are compatible with base and LED packages, meaning no matter how your Gladiator was optioned from the factory, these lights will work with your existing wiring and electronics setup.

A Note for Halogen-Equipped Gladiators

Factory halogen-equipped Jeeps may experience issues such as reverse lights strobing or shutting down. If this occurs, connect the included resistors per the included diagram. This is a simple fix that takes just a few minutes, and the necessary resistors are included in the box. For Jeeps where park lights shut down, a programmer such as a Tazer can also resolve the issue.

Built to Last — IP67 Waterproof Rated

The ORACLE JT Flush Tail Lights carry an IP67 waterproof rating, meaning they are fully sealed against dust ingress and can withstand immersion in water. River crossings, heavy rain, pressure washing after muddy trails — these lights are built to take it without flinching. The durable polycarbonate lens construction resists cracking and UV degradation over time, keeping your lights clear and bright season after season.

Two Styles to Match Your Build

Standard (Clear/Red): The classic look — bright red brake and turn sections with a clear reverse lens. Clean, sharp, and OEM-complementary in appearance while being unmistakably an upgrade.

Tinted (Blacked-Out): For Gladiators rocking a darker aesthetic, the tinted version delivers the same full LED functionality behind a smoked lens that blends seamlessly with blacked-out trim packages, dark wheel sets, and custom paint. Pairs perfectly with the ORACLE Racetrack Flush Style LED Tailgate Panel Light for a fully integrated rear lighting system.

What's in the Box

Each purchase includes one pair of ORACLE Flush Mount LED Tail Lights for the Jeep Gladiator JT, plus an online instruction guide. Resistors for halogen-equipped Gladiators are included where applicable. The cross-traffic sensor transfers directly from your factory assembly — no additional hardware required for sensor-equipped Jeeps.

Fitment: 2020–2025 Jeep Gladiator JT (all trims) — North American models. For EU/Export Gladiators: ORACLE recommends the Dual Function Amber/White Reverse LED Modules (Part# 5915-JT-023) for road-compliant turn signal operation.

FAQs: Flush Mount Tail Lights for Jeep Gladiator JT

Q: Will the ORACLE Flush Mount Tail Lights fit my Jeep Gladiator JT?

Yes. These lights are designed specifically for the Jeep Gladiator JT (2020–2025) in all North American trim levels, from the base Sport to the Rubicon and Mojave. They are not designed for European or export-spec Gladiators without an additional module upgrade.

Q: Do these tail lights work with the Gladiator's factory blind spot / cross-traffic sensor?

Yes. The cross-traffic sensor can be swapped directly over from the factory assembly and easily installs into the ORACLE Lighting tail lights for Jeep Gladiator. No modification or additional wiring is required — it's a direct transfer.

Q: My Gladiator has halogen tail lights from the factory. Will these still work?

They will work, but halogen-equipped Jeeps may experience reverse light strobing or shutoff due to the difference in electrical load between halogen and LED systems. The fix is straightforward: connect the included resistors as shown in the included diagram. Some Gladiators may also need a programmer (such as a Tazer) to prevent park lights from shutting down.

Q: What is the IP rating on these lights, and are they truly waterproof?

The ORACLE JT Flush Tail Lights are IP67 rated, which means they are completely sealed against dust and rated to withstand water immersion. They are fully suited for off-road use in rain, river crossings, and mud — and can be safely pressure washed.

Q: What's the difference between the standard and tinted versions?

The standard version features a traditional red and clear lens, while the tinted (blacked-out) version uses a smoked lens that darkens the housing's appearance. Both versions deliver identical LED performance and feature sets — the choice is purely aesthetic. The tinted version is especially popular with Gladiators in dark trims or with blacked-out exterior packages.

Q: Are these compatible with the ORACLE Racetrack Tailgate Panel Light?

Yes. The ORACLE Racetrack Flush Style LED Tailgate Panel Light is designed to work with the JT Flush Tail Lights, creating a cohesive, fully integrated rear lighting system with matching signature styling, dynamic turn signals, and plug-and-play connectivity.

Q: How hard is the installation — do I need a mechanic?

Most Gladiator owners with basic mechanical confidence complete this install in under an hour without professional help. The plug-and-play connectors match the factory wiring exactly, the cross-traffic sensor transfers without modification, and no cutting or splicing is required. An online instruction guide is included with every purchase.